Revolve technology

Revolving water.
Connected intelligence.

Proven treatment technologies, our own product lines and an open digital layer: from process water to wastewater, recovery and PFAS.

Anaerobic Technology

High-COD wastewater turned into biogas, with our proprietary reactor technologies, ranging from the conventional UASB, over the advanced EGSB to an innovative external settler.

Watch the film · 45 s

AnaFlow

UASB

Upflow Anaerobic Sludge Blanket

Proven, robust.

  • Around 6-10 kg COD/m³·d in a lower and larger diameter reactor
  • Dense granular sludge blanket, minimal recirculation
  • Inspection hatches for safe, direct access

AnaFlow-X

EGSB

Expanded Granular Sludge Bed (EGSB)

Best-in-class for variable industrial wastewater.

  • Around 15-20 kg COD/m³·d in a tall, slim reactor
  • Smaller footprint than UASB and more tolerant of fluctuations
  • Gas-tight and odour-free, with an advanced settler that keeps the biomass inside
  • Available for rent

AnaFlow-XT

High Rate

High-Rate Tower Reactor

The highest treatment intensity.

  • Above 20 kg COD/m³·d on a minimal footprint
  • Biogas-driven internal circulation, with no pumping energy at the design point
  • Unique venturi mixing chamber and a two-stage separator; granules never pass through a pump

AnaSep

X-Settler

External Granule Settler

Keep your granules without opening the reactor.

  • Captures granules in the recirculation stream and returns them
  • Proprietary degassing cyclone plus granule cyclones
  • Revive brownfield proposition for anaerobic reactors struggling with sludge loss, available for rent

BioSulph

Desulphurisation

Absorber BioReactor · H₂S removal from biogas

Clean biogas, biologically.

  • Very high H₂S removal in a single stage
  • Low caustic use, and no clogging
  • No reconversion to sulphate, sulphur leaves as a solid

Aerobic Technology

Biological polishing and nutrient removal, from conventional solutions to the advanced compact and low energy BioSphere RBBR reactor that can be loaded up to 20 kg COD/m³·d.

Watch the film · 52 s

BioZone

Clarifier

Aeration tank + clarifier

Proven, robust and familiar.

  • Continuous flow: aeration tank with clarifier
  • Return sludge keeps the biomass on target
  • Simple operation, for greenfield and revamp

BioCycle

SBR

Sequencing batch reactor

Flexible treatment in one tank.

  • Fill, react, settle and decant in a single reactor
  • Adjustable cycle times for changing loads
  • No separate clarifier or return sludge pumping

BioCycle

AGS

SBR with aerobic granular sludge

More capacity, smaller footprint.

  • Dense, fast-settling aerobic granules
  • Feast-famine cycle with a very short settling phase
  • Carbon and nutrient removal in a single reactor

BioMembrain-S

S-MBR

Submerged membrane bioreactor

Reuse-quality effluent, low energy.

  • Membranes separate the biomass from the treated water
  • Permeate can feed reverse osmosis directly
  • Standard modules with hollow fibre membranes

BioMembrain-C

C-MBR

Crossflow membrane bioreactor

Built for difficult wastewaters.

  • High crossflow shear for excellent fouling control
  • Easy access for inspection and membrane replacement
  • Standard skids with tubular membranes

BioCarrier

MBBR

Moving bed bioreactor (MBBR)

Robust, simple and compact.

  • Biofilm on free-moving carriers handles peak loads
  • No sludge recycle, minimal operational control
  • Paired with a DAF for compact solids separation

BioSphere

RBBR

Rotating bed bioreactor (RBBR)

High-rate COD removal, no blowers.

  • Natural-draught air: energy mainly for pumping
  • Self-cleaning carrier bed at 6-20 kg COD/m³·d
  • No clarifier or DAF, on a small footprint

Process Water & Recovery

From process water and boiler feed to ultrapure water, and advanced water recovery up to drinking water standards or to zero liquid discharge.

Watch the film · 58 s

Media filtration

Sand & multimedia

Sand, multimedia, activated carbon, activated filter media

The robust first barrier.

  • Layered media capture suspended solids and turbidity
  • Automatic backwash keeps the bed clean
  • Reliable pretreatment for membranes and resins

UF

Ultrafiltration

Ultrafiltration

A reliable physical barrier.

  • Removes suspended solids, colloids, bacteria and viruses
  • Inside-out or outside-in hollow fibres to suit the feed
  • Modular skids with fully automatic cleaning cycles

RO

Reverse osmosis

Reverse osmosis

Dissolved salts out, high-quality water in.

  • Removes dissolved salts, organics and micropollutants
  • Staged arrays balance recovery, crossflow and fouling
  • Automated flushing, CIP and performance monitoring

CCRO

Closed-circuit RO

Closed-circuit reverse osmosis

Maximum recovery, minimum brine.

  • Closed-circuit, semi-batch operation
  • Gradual concentration lowers the scaling risk
  • Brine discharged only at the end of each cycle

RO + ERI

Energy recovery

Reverse osmosis with energy recovery

Lower energy per cubic metre.

  • Energy recovery on the high-pressure brine
  • Brine energy goes back into the feed stream
  • Lower OPEX and carbon footprint, for SWRO and BWRO

DPRO

Double pass RO

Double pass reverse osmosis

Ultra-low conductivity.

  • First pass removes the bulk of the dissolved salts
  • Second pass polishes, for boiler feed or ahead of EDI
  • Second-pass concentrate recycled to the first pass

Ion exchange

+ Mixed bed

Softening, demineralisation and polishing

Polishing down to the last ion.

  • Resin beds exchange the unwanted ions
  • Mixed bed of cation and anion resin for final polishing
  • Regenerable resins for a long service life

EDI

Electrodeionisation

Electrodeionisation

Ultrapure water, without regeneration chemicals.

  • Electric field and ion-exchange membranes remove the ions
  • The resin is regenerated continuously by the current
  • Typically after RO, for ultrapure water

PFAS Treatment

Concentration with membranes and foam fractionation, matrix enhancement, adsorption on activated carbon and ion exchange, and destruction.